This amazing new device will allow you to seamlessly transfer between block batteries connected to a RED camera in a glitch-free and controlled manner. Connected batteries are subjected to a voltage test to ensure compatibility with the RED input voltage of 10-17 volts. Once this test is successfully met, the input LED will turn green and the battery is subjected to a momentary test current of 5 amps. If both tests are passed the voltage is then directed to the output and shown via an animated LED sequence. When the voltage drops below 11 volts, the LED colour sequence turns orange. Below 10 volts, the LEDs turn red. This signals the operator to connect a charged battery to the alternate BatteryBridge input. The same tests are performed on the newly connected battery and if successful, the user will be prompted with a flashing blue LED to initiate the "Push To Transfer" function.

A bonus however is that if a tested battery is already present, the BatteryBridge will automatically do the transfer!  This transfer is done without interruption to the output load and, most importantly, without any voltage or current spikes as you would expect from a cabled solution; this point can not be stressed enough!

An added benefit of using the BatteryBridge is the ability to push and HOLD the transfer button while two good batteries are connected. The BatteryBridge will then parallel the two inserted batteries for extended capacity and camera runtime. If a battery is removed while in parallel operation, the BatteryBridge will continue to power the load with the remaining battery. The BatteryBridge is a genuine Lentequip innovation made with the finest components available.

An invaluable tool for any RED user.  Recommended for use with our RED power splitter.

599,- €